Roofers in Spring Branch, Houston TX

Fifties ranch roofs, new build roofs, and two completely different jobs on the same street.

Spring Branch is the closest neighbourhood to our office, and it is also the most mixed roof stock we work on. A single block can hold an original 1950s ranch with its third roof on it, a 1980s remodel, and a new three-storey build finished last year. They need different things.

The original housing here is mid-century ranch: long, low, simple gable and hip rooflines, wide eaves, and often the original 1x6 plank decking rather than sheet plywood. Those are good roofs to work on. The rooflines are straightforward, the pitches are moderate, and there is very little of the cut-up complexity that drives cost up elsewhere.

What is different about a Spring Branch roof

The teardown effect

Spring Branch has seen years of teardown and rebuild, which means the roof next door may be twenty five years newer than yours and neither of you can tell from the street. If you are in an original house and your neighbours have rebuilt, your roof is almost certainly older than you think. The original build era puts a lot of these houses on their third or fourth roof.

Plank decking

Older Spring Branch homes frequently have solid board decking rather than plywood sheets. It is usually in better condition than people expect, and where it is sound we leave it. Where there are gaps between boards wider than the fastener can span, that section needs overlaying. A roofer who tells you all plank decking must be replaced has not looked at it.

Wide eaves and soffit ventilation

The generous overhangs on mid-century ranch homes give you excellent soffit intake area, which is a real advantage. The problem is that decades of blown attic insulation have very often been pushed straight into those eaves, sealing the intake completely. This is the single most common thing we find in Spring Branch attics, and it is cheap to fix.

New construction on old lots

The newer three-storey builds are a different job: steeper pitches, more valleys, more penetrations, and considerably harder access on a narrow lot. They price higher for real reasons, and we will show you why on the quote rather than just landing at a bigger number.

Who issues the permit here

Your roof permit is filed with the City of Houston, not with Harris County. That matters because Houston is its own incorporated city with its own building department, its own fee schedule and its own inspection, and a contractor who assumes county rules gets it wrong.

See the current fee, timeline and official source for Houston on the roof permit checker.

We pull it under our own name wherever one is required, and it is passed through at its actual cost with the receipt attached. A contractor asking you to pull your own permit is asking you to carry the liability for their work.

Storm history near Spring Branch

NOAA's Storm Events Database recorded 7 hail reports of 1 inch or larger within 5 miles of Spring Branch between 2016 and 2026, with the largest measured at 2.50 inches. In the same window and radius, NOAA logged 1 severe wind event of 58 mph or higher. The most recent hail or wind event on record near here was May 29, 2024.

This is a count of regional weather reports, not a finding about any specific roof. See the full Houston hail and wind history, with sources and method.

What we do here

Roofing is most of it, and the exterior work exists because the same rain that gets through a failed roof detail rots the boards next to it.

All twenty one services.

What it costs

Every job is priced Cost Plus. You see the supplier invoice for the materials, the crew hours at our published rate, the permit and disposal at what they actually cost, and one service fee of 20 to 30 percent set by job complexity and locked before anything starts. No second number, no change order conversation afterwards. The full breakdown.

For scale: on our published numbers a 25 square roof (2,500 square feet of roof, normal pitch, one story) comes to $7,854 to $8,341 depending on the shingle, before any permit or rotten decking. On 62 real jobs, a traditional Houston roofer's median was $496 a square. Both figures are in our report on roof replacement cost in Houston.

Our workmanship warranty is ten years, written into the contract. What that covers, and what it does not.

Common Questions

Do I need a permit to replace a roof in Spring Branch?

Spring Branch is inside Houston city limits, so the permit is filed with the City of Houston. We pull it under our name and pass the fee through at cost.

My house still has the original wood plank decking. Does it all have to go?

No, and it usually should not. Sound 1x6 decking often outperforms newer sheet goods. We replace boards that are soft or split and overlay only where gaps are too wide to hold a fastener.

How old is my roof likely to be?

If you are in an original mid-century house that has not been rebuilt, it is likely on its third or fourth roof, and the current one may be older than you think. An inspection will tell you rather than guessing from the build year.

You are close by. Does that make it cheaper?

The service fee is set by job complexity rather than drive time, so no. What it does mean is that if something is wrong we can be back the same day.

Nearby Areas We Serve

• Spring Valley Village
• Hilshire Village
• Hedwig Village
• Hunters Creek Village
• Bunker Hill Village
• Piney Point Village
• All service areas